Passivation / Chromite Treatment / Chromate Conversion of Aluminum
The passivation of aluminum is a chemical process based on the formation of a thin, stable conversion layer of chromium(III) compounds on the metal surface. The goal is to increase aluminum’s natural corrosion resistance and prepare the surface for subsequent coatings. The resulting layer adheres firmly, is very thin, and has virtually no effect on the component’s dimensional accuracy, while electrical conductivity is largely preserved. At the same time, the uniform surface ensures improved adhesion of paints, powder coatings, or adhesives.
During chromating of aluminum, a thin conversion coating consisting of chromium(III) compounds and aluminum oxides is formed. This coating provides effective corrosion protection and has the significant advantage of using non-toxic chromium(III), which significantly reduces the environmental impact compared to conventional chromating processes. This coating is colorless but less corrosion-resistant than that produced by conventional chromating.
Conventional chromating produces a thin conversion coating on aluminum but uses chromium(VI) compounds. These provide exceptionally high corrosion protection but may only be applied by registered and licensed companies. Chromating is therefore primarily used where there are extremely high requirements for the durability and protection of components, such as in the aerospace or military sectors. Despite environmental concerns, chromating remains a proven process for critical applications due to its reliable protective effect.
Both passivated/chromited and chromated aluminum surfaces are widely used in the aerospace industry, electrical engineering, the military sector, and in mechanical and plant engineering. The key factor is the combination of effective corrosion protection, electrical conductivity, and optimal adhesion properties for subsequent coatings. Depending on the process, the focus may be on maximum corrosion protection, an environmentally friendly, adhesion-promoting surface, or electrical conductivity.
Technical Specifications
- decorative
- abrasion-resistant
- Adhesion enhancer for paints and varnishes
- electrically conductive
- corrosion-resistant
temporary corrosion protection
Additional Options
- In combination with partial anodizing
- Factory Test Certificate in accordance with DIN 10204
2.1 Factory Certificate
3.1 Acceptance Test Certificate
Performance
Colorless passivation / chromite conversion coating (chromium VI-free)
- complete / partial
- Dimensions: 2000 x 500 x 1500 mm
- Weight: 350 kg
- Coating thicknesses from 0.1 to 0.3 µm
- Coating weight: 50–200 mg/m²
Standards & Guidelines
- LN 9368-1100
- LN 9368-1108
- DIN EN 12487 Al/A
- DIN EN 50939-2 Al/A
- DIN EN 50935 Al/A
- MIL-DTL-5541F Typ II Class 1
- MIL-DTL-5541F Typ II Class 3
- 80-T-35-1101
- HAP – 2100 / HAP – 2002
Yellow chromate treatment (containing chromium VI)
- complete / partial
- Dimensions: 2000 x 500 x 1500 mm
- Weight: 350 kg
- Coating thicknesses from 0.1 to 0.3 µm
- ating weight: 50–200 mg/m²
Standards & Guidelines
- LN 9368-1101
- DIN EN 12487 Al/C
- MIL-DTL-5541F Typ I Class 1
- MIL-DTL-5541F Typ I Class 3
- AMS 2477
- DIN EN 2437
- HAP-2003
